RSS Feed (xml)
-
key constraints are .....for...
(a) secondary key
(b) primary key
(c) foreign key
(d)... -
If a sinusoidal signal of 1100Hz is flat top sampled at a rate of 1800Hz,& this signal is passed through an ideal LPF with cutoff 1KHZ,the o/p contains the following frequency components: (This question was repeated again in the same paper !!!)
(a)only 800Hz
(b)...
(c)...
(d)... -
TRAP is _____interrupt
(a)synchronus
(b)asynchronus
(c)hardware
(d)... -
When the instruction RST is executed, the control jumps to location:
(a)0020
(b)0024
(c)0028
(d)none of the above -
A memory cell in static Random Access Memory is made up of:
(a)6 mos transistors---ans
(b)1 mos transistor and 1 capacitor
(c)4 mos transistors and 2 capacitors
(d)... -
Worst case algorithm is meant for the case
(a)when sometimes favourable
(b)when worst unfavourable
(c)...
(d)... -
A semaphore with negative count n(s=n) has how many processes in the Q?
(a)0
(b)n
(c)n+1
(d)n-1 -
If in a PCM system the no of bits used is increased from n to n+1,the signal-to-noise ratio improves by
(a)3dB
(b)6dB
(c)20ndB
(d)24ndB -
2 trains of length 110m & 90 m travelling at 45kmph & 50 kmph respectively..when will they pass each other?
(a)144mins
(b)102mins
(c)..
(d)... -
From a circular sheet of radius 10cm , 40% is cut off & from the remaining portion a cone is constructed, what is the ratio of the radius of the cone to its height?
-
If a vessel contains 56 litres of a mixture of milk & water in the ratio 3:2..what amount of water should be added to make the ratio 4:5?
-
2 pipes fill a cistern in 12 mins,pipe A is 3 times faster than pipe b...if only pipe B has to fill the cistern ,how long will it take?
(a)1hour
(b)2hours
(c)..
(d).. -
#define ADD(X,Y) X+Y
main()
{
#undef ADD(X,Y);
fun();
}
fun()
{
int y=ADD(3,2);
printf("%d",y);
}
o/p?
Runtime error(linker error): _add undefined in module -
Which of the following is illegal
(a)void v;
(b)void *v;
(c)void **v;
(d)all are legal -
#define int INTEGER/*line1*/
#define INTEGER int/*line 2*/
main()
{
INTEGER p=10;/*line 5*/
printf("%d",p);
}
o/p?
(a) compiler error at line 1
(b) compiler error at line 2
(c) compiler error at line 5
(d) No error,prints 10
ans:c -
main()
{
int counter=1;
for(;;)
{
counter++;
if(counter>9)
break;
}}
in the above program
(a)error b,coz for should have parameters
(b)error bcoz 2 semicolons in a for loop are invalid
(c)no error,loop is executed once
(d) no error ,loop is executed 10 times -
main()
{
char str={,H,,,E,,,L,,,L,,,O,,,\0,}
printf("%s/n",str+1);
}
o/p?
(a)prints ELLO
(b)prints HELLO
(c)prints ILLO (i.e.,H, is incremented by 1)
(d)... -
The average temperature for monday,wednesday,thursday was 46 o C.the average temperature fortuesday,wednesday,thursday,friday was 48(some no)..if temp on monday was 42 o C,what is the temperature on tuesday?
(a)32
(b)36
(c)37
(d)3.... -
The average marks of 12 students was found to be......(some no)...it was later found that while entering the data , it had been entered as 74 instead of 50...and 20 instead of 24(nos are not the same)...what is the correct average?
-
If a lady bought a house & sold it at 25% more than what she had paid after 3 years, she has to pay 50%tax on the gain...If C is the cost price,(gain=s.P-c.p),what tax did she have to pay?
(a)..
(b)C/8
(c)...
(d)... -
Some no of men(given)..complete a work in (given) no of days...after (some no) of days ..some more(given no) men join them,they will finish the work in how many days?
-
If a car travels from A to B at a speed of ,x, kmph & travels back from B to A at 4/5th the speed,then the total distance travelled in terms of percentage of x is?
(a)2400km
(b)3600km
(c)..
(d)... -
A question on malloc
int *p;
p=malloc(sizeof(int)*5);
if malloc returned the address 1000;the value of p+1 is
(a)1002
(b)1004
(c)...
(d)..... -
cascade amplifier is:
(a)a common emitter stage followed by a common base stage
(b)a common base followed by emitter follower
(c)...
(d)a common base stage followed by a common emitter stage -
A network has 7 nodes & 5 independent loops,the no of branches=?
(a)11
(b)14
(c)..
(d)... -
Many nodes transmit at the same time .....collision occurs...retransmit.....what is this called?
(a)
(b)
(c)collision.....enforcement
(d) -
If the characteristic impedance of a transmission line is 50ohms,at 1 end the impedance is +j50 ohms,the VSWR =?
(a)0
(b)infinity
(c)+j
(d)+1 -
Minimum no of NAND gates required to realize the boolean eqn: Z=ABC?
(a) 4
(b) 6
(c)..
(d).... -
It has been found that mercury poisoning due to industrial pollution causes Hobson,s disease. An island R is completely away from modern industry.People here follow subsistence agriculture method. A high % of people in Island R are affected by Hobsons disease.From the above paragraph, we can deduce
(i) there must be another reason for Hobson,s disease other than mercury posoning
(ii) mercury poisoning can be due to other reasons than industrial pollution
(iii)....
(a) i only
(b)ii only
(c) i ,ii, iii
(d) i and ii -
fun()
{
int counter=1;
counter++;
if(counter>10)
fun();
}...(some program similar to this one). the program will be executed infinetely--ans -
Which of these are legal?
i.a pointer to a function
ii.a pointer to a structure
ii.pointer to union
(a)i only
(b)i and ii
(c)i,ii &iii
(d)ii &iii -
Union..
{
int ivalue;
char lvalue;
struct boo
{
int ivalue;
char lvalue;
}databook;
};
(a)error as struct within union is not allowed
(b)error as struct members have same name as union members
(c)...
(d)..... -
How many stacks are there in DOS?
(a)1 stack
(b)2 stacks
(c)3 stacks
(d)... -
What is the o/p?
main()
{
char arr[5]={,a,,,a,,,b,,,c,,,d,,,e,};
printf("%s",arr);
}
Sunday, 20 July 2008
Aptitude - General Paper - 14
Aptitude - Puzzle - 26 July 2003 Paper - 15
Honeywell Campus Test at NCE,Kovilpatti on July 26 2003.
Aptitude:
Questions from Simple train pbms,age,ratio, proportion,Profit ,loss,Time & work,Time & Distance,Pipe &
Cisterns,Shaded aream,Volume ( cylinder ,cone ..),Reasoning,2 sections a part
with 4 questions b part with 6 questions
There must 4 domocrats & 3 republicans out of the 12 professors.No of X professors are A,B,C,D. No of Y professors are E,F,G,H,I.If A comes f & G r absent ..
so on.
There must 4 domocrats & 3 republicans out of the 12 professors.No of X professors are A,B,C,D. No of Y professors are E,F,G,H,I.If A comes f & G r absent ..
so on.
2. Technical(Computer Science)
OS,cache access time -100ns,Primary memory access time -1000ns,...then some data &
condition, find the actual access time.,microprocessor ( lot of questions ) 8085 no of16 bit registers.,8086 Instruction queue byte length?,8088 Instruction queue
byte length?,6800 what is it?8085 pgms...,port no calculationsData StructuresWhich
Data Structures to use for infix to prefix conversion,Worst case complexity for quick sort,preorder traversal Binary tree ...
-
int *data[10];whatdoes the variable data denotes?
-
{
int a[]={10,20,30,40,50};fun(a+1);
}
fun(int *p)
{ for(int i=1;i<=3;i++)
printf("%d",*(p+i));}
-
enum day { saturday,sunday=3,monday,tuesday};
value of saturday,tuesday.4. enum day {saturday,sunday=-1,monday,tuesday};
int x=monday;value of x?5. #define ADD(X,Y)
X+Ymain(){-#undef ADD(X,Y) fun();
}
fun()
{
int y=ADD(3,2);
printf("%d",y);
}
o/p? -
#define ADD(X,Y) X+Y
main()
{
#undef ADD;
fun();
}
fun()
{
#if not defined(ADD)
define ADD(X+Y) X*Y
int y=ADD(3,2);
printf("%d",y);
}
o/p? -
int x;
int *p;
int **p1;
int ***p2;How to assign each one?
Paper General - other Paper - 12
Honeywell - Sample Placement Question Papers 1
There were three sections namely..
1. AT (Quans and reasoning)
2. C Test
3. Technical... (Digital electronics,DSP,Control Systems,LIC,Micro processors and controllers).
section 1:
There was one ques thar had ms.braun,Mr.Allen.. totally six in number..3 of them would smoke.. one
prefers silence... It was quite easy.. Another Ques was abt democracts and republicans haveto be selected from two groups of A,B,C,D,E and F,G,H,I.Atleast one has to be an army person and
another an economist...
* The quans was ok... problems based on
cisterns,volume.profit and loss ,work.... and a couple
of ques on Venn Diagram.
Section 2:
most of them were easy... but there were tougher ones based on files and unions.
Section 3:
There were 3 to 4 ques based on Control System which included one block diagram and a signal flow graph.
The diagram for Type 2 order 5 system.
The ques from LIC were very fundamental like.... the slew rate depends on _______.
The other ques that I remember are
What is FFSK?
A ques on the properties of Darlington Pair.
FFT is due to ______
there were ques on boolean algebra like... the min
terms are (2.3.4.5) then the boolean expressions is
_____
_expression for Algebraic XNOR is _______
Micro processor and controller ques was quite easy...
the two modes of 8086.
8051 is optimized for ____ bits.
why program counter?...
stack is used for_______
Whole Testpaper - 1 April 2005 Paper - 13
HI ,
this is the pattern i have..i didn,t attend for honewell so don,t expect any more than this plz do check this and don,t send any queries to this id no use.
Their pattern is
OS : 10 Questions
C : 10 Questions
C++ : 10 Questions
Java : 10 Questions
OS is compulsory and you can choose any one of these three language. I had
chosen C++.
Here is few question I still remember. please do not go on my answers they
may be incorrect also.
C++ Questions
1) If there is one class template which has one static member variable that static variable will belong to
a) Every instance of class template will share the same copy of static variable
b) Every instance of class template will have its own copy of static variable.
c) Compilation error
d) Don,t remember.
2) What is template specialization ???
a) define a new template class for a specific data type.
b)c)d)
3) How we will overload operator *+= such that
obj1 *+= obj2;
implies that
obj1=obj1*(obj1+obj2);
four choice were there last option was d) it is not possible I checked
that option.
4) IN C++ what does the operator overloading means.
a) Giving new meaning to existing C++ operators
b) defining functionality of existing C++ operator for user define objects.
c) defining new operators.
d) don,t remember.
5) what is ,>>, in C++
a) right shift operator and insertion operator depend upon the use
b) right shift operator and extraction operator depend upon the context use
c) right shift operator and insertion/extraction operator depend upon the use
6) class A
{
int a ,b;
A() : a(0)
{b=0;}
};
if you create obj of this class as A obj;
a) b will be initialized before a
b) a will be initialized before b
c) both will be initialized together
d) none of these.
OS Question
All OS questions were based on basics of UNIX all small -2 commands.
1) how image of one process can be replaced by other process
a) exec
2) how image of one process can be copied to new born process
a) fork
3) how can you list all the files used by a particular process
4) how do u create a link of file
C Questions
I did not attempted the C paper but still I just had a look on C and java
paper. in C most of the question were programs and their out was asked in LINUX environment.
1)
int main()
{
char *a= "Novell";
char *b;
b=malloc(10*sizeof(char));
memset(b,0,10);
while(*b++=*a++);
printf("%s",b);
return 0;
}
2) int main()
{
printf("Hello");
fork();
printf("World");
}
Paper Technical - Other Paper - 9
Test contained multiple choice questions divided into
a) Verbal ability (15 ques)
b) Numerical aptitude (15 )
c) Logical and analytical ability (15)
d) Elementary computer science (10)
d) Programming langauages (20)
e) Operatins systems and Data structures (25)
Some sample Questions
-
What is a Real-Time System ?
-
What is the difference between Hard and Soft real-time systems ?
-
What is a mission critical system ?
-
What is the important aspect of a real-time system ?
-
Explain the difference between microkernel and macro kernel.
-
Give an example of microkernel.Why paging is used ?
-
Which is the best page replacement algo and Why ?
-
What is software life cycle ?
-
How much time is spent usually in each phases and why Which one do U want to work if selected in Honeywell ?
-
Which are the different types of testing ?
-
What is a distributed system ?
-
Some questions about CSP.
-
Which languages do U know ?
-
What are the differences between Pascal and C.
-
questions from Compiler construction and Lisp.
-
Which are the different computer architecture?
-
What is the requirement in MIMD ?
-
What is the difference between RISC and CISC processors ?
-
Difference between loosely coupled and tightly coupled systems ?
-
What is an open system?
Paper General - other Paper - 10
Honeywell Written Test has three sections.
2. c ( 30 questions) – 20 mins
3. technical (OS(10 questions)+networks(10
questions)+DBMS(10 questions)+Data structures(20 questions)+Microprocessor(10 questions))
quans was very easy (all ques r from aggarwal) c also pretty much easy (all were from files,structures,unions,etc)
technical very basic questions …….
Group Discussion
The topic was “Appointment of foreign coach in Indian cricket team is right or not”
And other groups had topics like Brain drain, education system………
Technical Interview
1. Introduce urself
2. explain ur projects….
3. rate urself in c++
4. what r de storage classes in c++
5. write a pgm to implement static variable…..
6. write a pgm to implement extern variable …….
7. tell something abt OOP
8. what is inheritance.(public,private,protected)(they
asked me a lot in this secion..)
9. What is polymorphism and write a pgm to implement it..
10. tell something abt OS
11. wat is a scheduler.
12. wat r de types of scheduler..and explain.
13. wat is diff b/w preemptive and RR scheduling.
14. wat is mem mgt
15. wat is segmentation
16. wat is paging..
17. diff b/w paging and segmentation….
18. wat is fragmentation (internal and external)
19. wat is compaction……
20. they asked me to list wat r de data structures u know
21. wat is stack
22. applications of stack
23. wat is queue
24. appln of queue………
25. wat is infix,prefix,postfix expressin
26. evaluate of expression…..
27. wat is circular queue…….
28. diff b/w array and linked list
29. wat is doubly linked list…….
General - other Paper - 11
Honeywell conducted a test in IIT and Interview was in their office at B,lore. Test contained 100 multiple choice questions divided into
a) Verbal ability (15 ques)
b) Numerical aptitude (15 )
c) Logical and analytical ability (15)
d) Elementary computer science (10)
d) Programming langauages (20)
e) Operatins systems and Data structures (25)
Not sure about the number of questions.
Verbal ability questions contained 3 parts.
a) One passage is given and U have to answer 5 questions
b) Some words are given and their synonyms have to be written
c)
Numerical aptitude and Logical questions were the usual stuff.
---------------------------------------------------------------
I had 4 rounds of interview.
First round (around 45 minutes) contained, questions from Real-time
-----------
Systems (my research area), operating systems and Software Engineering
Explain U,r research work.
What is a Real-Time System ?
What is the difference between Hard and Soft real-time systems ?
What is a mission critical system ?
What is the important aspect of a real-time system ?
Explain the difference between microkernel and macro kernel.
Give an example of microkernel.
Why paging is used ?
Which is the best page replacement algo and Why ?
WHat is software life cycle ?
How much time is spent usually in each phases and why ?
Which one do U want to work if selected in Honeywell ?
( I said I don,t like testing )
They asked why ?
I said it is a boring job. Then they tried to analyse
the knowledge in testing.
What is testing ?
Which are the different types of testing ?
Then they explained the way they do testing. They said that they are
doing testing in requirement phase and design phase so that if any
problem comes in those phases it is not ncecessary to go back and change
the requirement or design. All the test processing is automated.
Why do U want to join Honeywell ?
Ans : To get a practical feeling of Real-time systems.
Do U know C++ ?
How good are U in C and C++ ?
Rate U,rslef in both C and C++. ( 1 - 10 marks)
Second round (around 45 minutes )
They wanted a bio-data at the time of inteview. I gave the placement office bio-data and in that one there was column ,Major subjects studied,. Many of the questions came from those.
Explain U,r research work. Lot of questions from it.
What is a distributed system ?
Some questions about CSP. ( I kept quiet)
Which languages do U know ?
What are the differences between Pascal and C.
I said Pascal is a strongly typed language.
Then what is typing and its advantages ?
Then he asked some questions from Compiler construction and Lisp.
WHich are the different computer architectures ?
What is the requirement in MIMD ?
What is the difference between RISC and CISC processors ?
Difference between loosely coupled and tightly coupled systems ?
What is an open system ?
Still a lot of questions from software engineering .
Which are the different phases in Software life cycle (asked again)
Why is analysis and testing phases very important ?
Which methodologies are U familiar with ?
Have U worked in windows ? (Yes)
What is the difference U have seen from a Dos environment ?
I said it event driven .
So what do U mean by event driven ?
How do WinMain look like ?
How the messages are processed in Windows ?
(Queue of events)
What are parameters needed to distinguish an event ?
Have U done any network programming ?
Why networks are layered ?
What is the advantage of that ?
How many layers are there in OSI ?
WHy is it called OSI model ?
Are U familiar with network topologies ?
Which are the different network toplogies ?
Tell an example of bus type network.
I said ethernet.
What is the Bandwidth of ethernet ?
Explain the advantage and disadvantage of ethernet ?
Which is the protocol used in ethernet. (CSMA/CD)
Why is it called so ?
If all stations tries to communicate at same time, what will happen.
What is binary exponential backoff algo ?
What is the advantage of Ring network ?
Compare it with ethernet.
In a real-time system which one do U prefer and why ?
What is the basic requirement of a real-time network ?
Which one is costly - ethernet of ring networks ?
Some questions form OOSD and Digital signal processing.
What is inheritance, encapsulation etc.
Third Round (15 minutes)
Asked about the percentages and marks during SSC, PDC, B.Tech and MS.
When can U join ?
Who is U,r guide ?
U are from which place ?
Where is it in Kerala ?
How do U perform in the first two interviews ?
WHy have U given Honeywell as dream job ?
Some more personal questions
Fourth Round (45 minutes)
1. Aptitute test : 15 Minutes, 20 Questions
Towards the middle questions are easy than from the front.
eg. Product of three consecutive nos. 210. What is the sum
of two least numbers?
ans.: 5 * 6 * 7 = 210 , sum = 11 is answer
eg. If the area of the sqaure is increased by 69 % how
much the length of the side will increase?
ans.: 13 (i think)
eg. if the sum of five consecutive nos. 35? how many prime nos
are there :
ans: 5 + 6 + 7 + 8 + 9 = 35 so two primes
eg. if the length of the rectangle is reduced by 20% and breath
is increased by 20 % what is the net change ?
ans.: 4 % decrease 2
i. Electrical & Electronics
15 Questions and,nand...circuit realted stuff, ..........
ii.Data Structures, Algo., & Complexity theory : 5 questions
a. if W is a sequence of strings without a and W, is its reversal
then WaW, is generated by:
ans. i think Context Free Grammmars
b. Whether all recusive pgm can be writtten iteratively?
c. What data structes you will use if you want to go to first record from
the last and vice versa?
ans.: doubly linked circular list
d. Given 10000 nos. and 48MB Memory. What is the complexity of the efficient sorting algo.? (the algo. is not mentioned)
e. Given a C code and ask what it does?
I think the code was something similar to Bubble sort and that particular code does the sorting in Desending order and the complexity is O(n^2)(which is the next question).
iii. OS : 5 questions
a. If there are too many page faults what is the problem?
b. To ensure one pgm. doesnt corrupt other pgm. in a Multi-pgm. enviornment
what you should do?
c. Which one you will use to implement critical section?
Binary Semaphore
d. Which one is not needed for Multi-pgm. enviornment?
options are: virtual memory,security,time sharing,none of the above.
iv. Networks and Hardware: 5 questions
a. Which one is not done by Data link layer ?
bit stuffing, LRC,CRC,parity check
b. Which one is not related to Data link layer?
c. Which one is not suitable for client-server application?
tcp/ip,message passing,rpc,none of the above.
d.
v. Databases and Misc.: 5 questions
a. What SQL .................. (not the expansion)
b. Indexing in databases give you ............
c.
vi. C Pgm. : 5 questions
1. int a=1,b=2,c=3;
printf("%d,%d",a,b,c);
What is the output?
2. for(i=0; i<=10;i++,printf("%d",i); +- (+- is there in the questions)
3. Scope of Static Variable ............
4. Given a C code and what is the output?
Whole Testpaper HYDERABAD - 22 June 2006 Paper - 7
I am Haritha. On 23rd June i have attended Honeywell written test in CBIT, Hyderabad. The eligibility for the written test was through noukri and referrals and only 70%+ in B-tech.
I have applied it 2 months back n got a call letter recently. They informed bfore 15days by mails about the written test.I would like to share my experience so that it becomes easy for others who r appearing for it in future.
Cutoff: 70%+ in B-tech
Selection Procedure:
Written test (overall cutoff is 52 marks and no negative marking)
2 technical interviews
1 HR interview
Paper Pattern
100 questions : 100 minutes.
The questions were from many subjects.
They are DBMS - 10 to 15 questions(Dont remember in exact figures)
C and DS - 10 to 15
Microprocessors - 10 to 15
Computer networks (the same no:)
Operating systems
General Aptitude 20 questions.
Mind u: There was no verbal or verbal reasoning and any GDs
Some questions I remember:
1) A relation to be in 3rd normal form is in _ normal form
2) How can u increase ports of a microprocessor? (8251,8255,8253 and 1 more option)
3) What is 8253?(USART,DMA,programmable interrupt controller and one more)
4)8255?
5)How many bits microprocessor was first developed?(8 bit)
6)In a 3 bit instruction middle bit is (operand ,operator n ................)
7)Which of the following is IPv6 addressing?
8)In Which of the following layers SMTP is used?
9)About transport layer
10)To select records from a relation where primary key is ename and ename starts with "p"
11)small c logical questions
12)apti mostly from profit and loss
13)1 heights and distance prob
14)1 prob on true discount
15)Brouter is hybrid of?
The aptitude questions are really very easy u can solve them easily. There was an overall cutoff of 52 marks ofcoz they didnt announce officially. Coming to technicals u must be through with ur basics. All basics.
Frends i have got sleected in the written test.Next day i had interview.
About interview.
2 techinical rounds
the questions were like
1st technical (1 person)
1) Rate ur self in C and DS and C++
2) About linked lists(programs)
3) About sortings(logics)
4) About Normalization.
5) y do we need denormalization?
6) What r bitfeilds in C?
7) Probrams of linear search and binary search.
for somebody they asked about there project also but they didnt ask me.
2nd technical (A 2 member Panel)
1) C and Ds questions.(enum types)
2) Difference between structure and Union
3) Linked lists declarations
4) Difference between C and Java(coz i mentioned Java in my resume)
5) Say Some thing about data structures
6) What r oops principles?
7) How does an OS manage memory?
8) About AWI(java)
9) Regarding garbage collection.
10) Can we clear memory explicitly?If so how?Write a stmt for such an action.
11) exceptions
and many more.
I had my HR on the very same day.
It was kool. They asked me
Say me about ur academic profile
1) Difference between CSE and IT?
2) Why honeywell?
3) Package u desire?
4) Have u attended any other compnaies?
5) Family background?
6) Willingness to relocate and sign for bond?
7) R u ready to work in Madurai
8) Highest position u desire for?
Whole Testpaper - 1 May 2006 Paper - 8
Hi ,
thanks for all the help u guys provided. I have finally got placed in Honeywell .
Honeywell pattern
10 dbms
10 os
10 datastructures
10 micro
10 a mix of all
30 c
20 apti
negative marking is there
cutoff 60-70
2 tech interview
1 hr
interviews are strenuous 1 1/2hr each.
prepare well and thoroughlyWhole Testpaper BANGALORE - 22 July 2006 Paper - 5
These are the questions asked for the Honeywell test conducted on 22 July 06 in their Bangalore office.
There were 100 questions:
50 Technical questions (branch wise)
30 C questions
20 aptitude questions
Aptitude is very easy. Simple questions from profit&loss, ratio, odd-man series, time-distance, clock...
Technical from OS, DBMS, CN, 8085, unix, DS.. some of the qns I remembered are given below.
1) Binary search tree is used in
a) sorting b)searching c)indexing d)all the above
2) Given a tree..write the preorder traversal
3) Given an infix expression..write its postfix
4) First general purpose microprocessor
a) 2002 b)4004 c)8080 d)8085
5) What is 8253
6) ____flag is not used in 8085 jump instructions
7) SNMP is used in which layer
8) Banker,s algorithm is used for
9) Belady,s anomaly is related to___
10) Which of the following is non-preemptive
a) FIFO b)SJF c)Round robin d)all the above
11 )A relation in 3NF is in______
12) A question on serializability
13) One SQL query
14) Functional dependency one question
15) The first general purpose microprocessor is ____-bit
16) In a three byte instruction the second byte indicates____
17) Average case analysis for partition exchange sort
18) How the receiver knows to what service the packet to be forwarded?
19) Given a binary sign magnitude no:..write its decimal
20) The order in which data is transferred frm magnetic disk
disk->main mem->cache->h/w register
21) In which layer of the network datastructure format change is done
22) Which of the following allow parallel & serial connections
a)DHCP b)PPP c)IPX d)all the above
23) Given some IP addresses...identify which one is IPv6?
24) Open addressing and chaining is used in
a)sorting b)indexing c)collision-resolution d)none of the above
25) Storage space requirement for diff: sorts in the descending order
26) Which scheduling policy is used in unix..
27) In database which mechanism is suitable for recovery?
a)checkpointing b)indexing... c) d)
28) Which of the following is not correct?
a)arrays consume less space
b)linked lists are more complex
c)linked lists use less space
d)
29)which of the following is not correct?
a)main does not have arguments
b)main can have command line arguments
c)main have variable arguments
d)
30) Which of the following is not correct?
a)function can call itself
b)function can have no return type
c)function cannot have multiple return statements
d)function can have arguments
31) When an interrupt is called control is given to..
a)interrupt vector table
b)interrupt service routine
c)stack
d)
32) Which of the following is not a synchronization tool
a)semaphore b)mutex c)mutual exclusion d)message passing
33) Given a graph write the BFS for it
34) How can u increase ports of a microprocessor?
a)8255 b)8259 c)8253 d)8251
35) What is 8259?
36) Which of the following maintains a constant time(best,worst,average)?
a)searching b)sorting c)indexing d)none
37) In a database a table is stored not fully..it is an example of
a)views b)logical data independence c)abstraction d)all the above
38) The time CPU takes to complete the execution of processes____
39) The minimum length of TCP/IP header and IP datagram header
40) Process spawning in OS is__________
41) The topology that uses a central hub is___
C questions were dam easy..pointers and strings ..if ur strong in pointer concepts u can score easily. 2 or 3 qns frm files,enum,extern..
Whole Testpaper HYDERABAD - 24 June 2006 Paper - 6
Hi Friends,
My experience at Honey Well on 24/06/2006
Eligiblity : 70% in B.Tech
Location : Hyderabad (CBIT )
Mode : Off-Campus
***********
Round1: Written test consists of , 50 questions from all subjects +30 questions from C + . 20 questions from aptitude(mainly concentrate on percentage problems).
Duration : 1hr 40min
There is a separate paper for CS and Electronics students,but C and Aptitude questions are same for all branches.
No. of students appeared for written test : 1100 (approx)
No. of students shortlisted for the second round are 150 students.
*************
Round 2: Technical round-1
1.First they asked about my project (Be Prepare with it) ?
2.Tell some thing about urself ?
3.Write code for reversing the SLL(single linked list) ?
4. Explain ToH (Towers of honie) problem ?
5. He asked some basic questions on pointers ?
6.How can find missed value ,if u want to store 100 values in a 99 size array ?
U have to insert the elements randomly ? And one important thing is u have to find in . . the value in the single pass ? (hint:Use the Sum of numbers formulae n(n+1)/2)
7. And some other which I not remembered ?
Duration :20 min
No.of students shortlist for 3rd round are 30 students.
************
Round 3: Technical round-2
For some students they interviewed for 45min, but for some just they took 15min only
1.He asked me some typical query to write in SQL and also to write java program for that ?
2.a^b + b^ a =100? Solve for ,a, and ,b, ?
sol: (first solution) 1^99 +99^1 =100
(second solution) 6^2 + 2^6 =100
No. of students got offer : 06 (approx)
********************
Round 4: HR round
This is just for formality
This company take the students who are sound in techinal. They least bother about the remaing thing like....
Suggestion : Don,t be in a hurry to learn too many questions. First learn the concepts then after look good number of problems on that topics.
(Paper Submitted By : V.Raghavender, Hyderabad)
Whole Testpaper Future Institute , Kolkata - 20 April 2007 Paper - 2
Hi I am Subhrojit Chowdhury from G.N.I.T. Kolkata Recently I have been placed in Honeywell Automation India Limited.I would like to share my experience with you guys.
Selection Process
1>Written Test.
2>Technical Interview.
3>H R Interview.
Written Test
It consisted of 2 parts General Maths,General English.....Almost 1500 students appeared for the test and 43 students cleared the aptitude test.After that we had our technical round 21 cleared the round.At last 14 of us cleared the H R round.
Written Test(30 questions)
1>R.S Agarwal Will do The job.
simple percentage,profit and loss,work and wages etc
General English(15 questions)
1>Consult GRE Barrons.
Synonyms,antonyms,Paragraph
Whole Testpaper Bishep Heber College Trichy - 7 April 2007 Paper - 3
I attended the HONEYWELL written test on 7th April 2007 at . The selection proceture has 4 rounds.
1st round-----------> written test
2nd round----------> tech interview
3rdd round----------> tech interview
4th round----------> HR interview
1st round
In first round they separate the whole candidates as two screams namely electronics stream and IT stream. we have separate paper according to our stream. I,m a EEE student so I come under electronics stream.
Ist round contains two types of paper
1) objective type
2) descriptive type
Objective type:
It contains 100 objective type questions.
50 tech [ Electronics, DSP, Control Systems, Digital Sysrems, Micro processor, LIC and etc,]
30 C[structure, Array, pointer, data types, functions ]
20 aptitude[very eay R.S Agarval enough]
all in 100 minutes. 25% negative marking for each wrong answer.
Descriptive type:
It has two section
1) tech part [Electronics, DSP, Control Systems, Digital Sysrems, Micro processor, LIC and etc]---> 10 mark
2) Programming part [ u,ve a option to choose C, C++, JAVA, .NET] ------->10 mark
All in 20 minutes
2nd round.
I attuned it for about 1 hour.
all questions from basics from your dept [ Electronics, DSP, Control Systems, Digital Sysrems, Micro processor, LIC and etc,] and C, and maily your project. Focus on your RESUME. That,s ver very important.
3rd round
I attended it for about 45 minutes, some what depth in your dept. and C. They(2 pannel) asked me about past interview experience in this round.
4th round
This is HR round. It was very easy. It contains genral questions like what,s ur strength?, what your frinds think about u?, ur achivements and etc... I attended the 2nd, 3rd, and 4th rounds in HONEYWELL TECH SOLLUTIONS, MADURAI.